thermal insulation coatings from HPC coating

Maximum energy efficiency with a high temperature coating designed to Insulate Every Surface

HPC® Coating, HPC®-INT Coating and HPC®-HT Coating is a single component water-based coating designed to insulate hot pipes or surfaces that load up to 650°C. The coating is not a reflective coating but an insulation coating and works to block or hold the loading of higher heats and to resist the transfer of heat through the coating to the cooler side. Holds heat in the surface in which it covers. Once coated, the surface should be equal to the interior temperature.

Contact

for Industry

HPC® Coating "high" Heat Protection

HEAT BLOCK COATINGS from World's Coating Innovator™

Get EPA Award-Winning “high” heat protection that surpasses conventional insulation with HPC® Coating, HPC®-INT and HPC®-HT Coating. HPC® Coating is a ceramic based, water-borne insulating coating designed to insulate in high temperature situations from ambient to 650°C. Use HPC® as an insulation to block heat loss, save energy, reduce maintenance, stop CUI (Corrosion Under Insulation), reduce landfill and for employee protection.

Reference documents for Download

Technical Datasheets

Safety Datasheets

Hot Surface Coating SDS

Tests

HPC-coatings-on-heaters-at-Hyundai-Oil

Case Studies

HPC-v-Insulation-Wrap-for-Steam-Pipes

HPC-on-Vancouver-Shipyards

HPC-on-tanks-and-valves

HPC-Cold-Pipe-Insulation

HPC® Coating – Ambient to 204°C / 400°F

HPC® Coating is water-borne and extremely lightweight in appearance. It uses a special acrylic resin blend with specific ceramic compounds added to provide a non-conductive block against heat transfer.

HPC®-INT – 204°C / 400°F to 426°C / 800°F

HPC®–INT Coating is designed to control heat transfer on surface. It’s water-borne and extremely lightweight in appearance. HPC®–INT Coating uses a special acrylic/silicone resin blend with specific ceramic compounds added to provide a nonconductive block against heat transfer.

HPC®-HT – 426°C / 800°F to 650°C / 1200°F

HPC®-HT is a two-part (9 to 1) hybrid silicone nonflammable resin (Part B is cure). Part A is water-based resins using specific ceramic compound loads for application directly over surface temps of 232°C (450°F) and up to 600°C (1112°F). It was designed to block and hold the interior temperature on the surface and reduce heat transter loss to ambient. Mix Part A and Part B together, HPC®-HT Coating offers a ‘green’, nonflammable, non-toxic formula for high-heat surface applications. HPC®-HT is easily applied, and can be sprayed direct to metal and other high-temperature surfaces up to 600°C. Sold only in 5-gallon pail kits.

Interesting publications